Concrete / Screed

Complete set with 6 test rakes for vertical and horizontal surfaces to determine water penetration according to Prof. Karsten. The composition can be freely selected.
 

Starter set with 2 test tubes for vertical and / or horizontal surfaces to determine the water penetration according to Prof. Karsten. The composition of the test tubes can be freely selected.
 

For cementing the water penetration test tubes.
Weight: 250 gram
Dimensions: 110 x 25 x 60 mm

The Pleyers test tube is used to determine the water absorption coefficient of building materials. It is characterised by a special design that minimises multidimensional liquid transport, thus enabling more precise measurements. Available in 30 and 50 mm diameter.

The Resipod is the most accurate concrete surface resistivity meter in the world with the highest possible resolution and an efficient all-in-one solution for measuring the electrical resistivity of concrete.

Handy concrete cover meter with integrated display and detection function. Reinforcing bars and their diameters can be accurately located with the Profoscope.
No longer available! Successor Profometer PM8000 Lite!

The protective film is attached to the underside of the Profoscope. It is subject to natural wear and tear and is offered here as a spare part.

Sturdy transport case for Profoscope.

Rebar diameter and cover meter. The robust cover gauge for easy location of rebars, for determining safe drilling points and for quick quality control by reading off the cover and the diameter of the rebars. Made in Switzerland

The Proceq DY-2 adhesion testers can be used in all areas of tensile adhesion testing. They are user-friendly and lightweight, which makes it possible to work overhead or on walls, and they can store a complete set of data from the test.

Determine the adhesive tensile strength of screed with the tester.
To measure the maximum test value, the instrument has an analogue display with drag pointer.
The handling is simple and safe

Pull-Off Adhesion Tester
Measures the force required to detach a specified test area of a coating from the substrate using hydraulic pressure.

Pull-Off adhesion tester
Measures the force required to detach a specified test area of a coating from the substrate using manually generated hydraulic pressure. This process is also called pull-off testing.

The OriginalSchmidt rebound hammer is the standard device against which all rebound hammers are measured. It is the basis of all international standards for rebound hammers.

The industry-leading rebound hammer sets a whole new standard for performance and ease of use. The Original Schmidt provides a digital tool for testing and analysing the strength and homogeneity of concrete, as well as reporting.

The world's most advanced rebound hammer with unrivalled dispersion characteristics, robustness and maximum measuring range.
Versions: Type N or Type L

The concrete test hammer is a measuring tool with which you can test the strength of concrete according to the Schmidt principle. Using this measuring method, the concrete test hammer measures the quality of concrete. This is its main application in the building and construction sector. The built-in mechanism always ensures the same impact energy of 2.207 Nm.

The PCE-HT-450 concrete test hammer is an analog measuring device for determining the concrete strength according to the Schmidt principle. In this measuring method, a kinetic impact energy from the concrete test hammer hits the concrete. The resulting rebound allows the concrete test hammer to determine the strength of the (high-performance) concrete.

The concrete test hammer works according to the Schmidt principle. In addition to its main use in the building and construction sector, the simplest concrete test hammer to use is also used for other purposes in many other industries (winding hardness testing of products on a roll, ...).