Gann Hydromette HB 30, #30001510
The HB 30 is an electronic wood and building moisture meter based on the resistance measuring principle for precision measurements of sawn timber (up to 180 mm thick), chipboard, parquet and set building materials. All common types of wood can be measured.
Building moisture (e.g. screeds, mortars, plasters, concrete, bricks, insulating and insulating materials) can be measured using the capacitive measuring method or the resistance measuring principle. Thus, on the one hand, non-destructive measurements can be taken, and on the other hand, exact moisture profiles of affected areas can be created.
Furthermore, the surface temperature can be measured by means of an infrared sensor.
Particularly suitable for parquet layers, interior fitters and carpenters.
Measuring range of the Gann Hydromette HB 30
Wood moisture:
Resistance-based measurement:4 to 30 % (atro)
Building moisture:
Resistance-based measurement:
0 to 80 digits
0.5 to 25 % by weight (*)
0.3 to 12 CM-% (*)
Capacitive measurement:
0 to 199 digits (scan range)
0.3 to 8.5 wt.% (*)
0.3 to 6.5 CM-% (*)
Surface temp:
Infrared measurement:
-20 to 199.9 °C
Short description:
- Handy moisture meter for quick single and serial measurements with high-quality measuring amplifier
- Direct display of wood moisture in % via large LCD display, resolution: 0.1 %
- Wood moisture measurement: characteristic curve groups 2 and 3 are included in the measuring device, based on the 4-step wood type correction
- The unit is supplied with a 9 V battery
- Dimensions: 140 x 90 x 50 mm (LxWxH)
- Weight: 230 g
Wood moisture:
- Driving electrode M 18 (3500) (Ramm-Elektrode M 18 (3500))
- Impact electrode M 20 (3300) (Einschlag-Elektrode M 20 (3300))
- Surface measuring cap pair M 20-OF 15 (4315) (Oberflächen-Messkappenpaar M 20-OF 15 (4315))
- Conversion kit M 20-DS 16 (4310) (Umrüstsatz M 20-DS 16 (4310))
- Insertion electrode tip pair M 20-HW 200 (4350) (Einsteck-Elektrodenspitzenpaar M 20-HW 200 (4350))
- Plug-in electrode tip pair M 20-HW 300 (4355) (Einsteck-Elektrodenspitzenpaar M 20-HW 300 (4355))
Building moisture:
- Drive-in electrode M 20 (3300) (Einschlag-Elektrode M 20 (3300))
- Insertion electrode pair M 6 (3700) (Einsteck-Elektrodenpaar M 6 (3700))
- Surface measuring cap pair M 20-OF 15 (4315) (Oberflächen-Messkappenpaar M 20-OF 15 (4315))
- Depth measuring electrode pair M 21-100 (3200) (Tiefen-Messelektrodenpaar M 21-100 (3200))
- Depth-measuring electrode pair M 21-250 (3250) (Tiefen-Messelektrodenpaar M 21-250 (3250))
- Brush-electrode pair M 25-100 (3740) (Bürsten-Elektrodenpaar M 25-100 (3740))
- Pair of brush electrodes M 25-300 (3743) (Bürsten-Elektrodenpaar M 25-300 (3743))
- Flat electrode pair M 6-Bi 200 (3702) (Flach-Elektrodenpaar M 6-Bi 200 (3702))
- Pair of flat electrodes M 6-Bi 300 (3703) (Flach-Elektrodenpaar M 6-Bi 300 (3703))
- Plug-in electrode tip pair M 20-Bi 200 (4360) (Einsteck-Elektrodenspitzenpaar M 20-Bi 200 (4360))
- Plug-in electrode tip pair M 20-Bi 300 (4365) (Einsteck-Elektrodenspitzenpaar M 20-Bi 300 (4365))
- Insertable electrode tip pair M 6-150 (3706) (Einsteck-Elektrodenspitzenpaar M 6-150 (3706))
- Insertable electrode tip pair M 6-250 (3707) (Einsteck-Elektrodenspitzenpaar M 6-250 (3707))
- Active electrode B 50 (3750) (Aktiv-Elektrode B 50 (3750))
- Active electrode B 60 (3760) (Aktiv-Elektrode B 60 (3760))
- Active electrode LB 71 (3765) (Aktiv-Elektrode LB 71 (3765))
Surface temperature:
- Infrared surface temperature sensor IR 40 EL, # 3150 (Infrarot-Oberflächen-Temperaturfühler IR 40 EL, # 3150)
Other accessories:
- Stand-by case BK 14-I (5061) (Bereitschaftskoffer BK 14-I (5061))
- Stand-by case BK 14-II (5062) (Bereitschaftskoffer BK 14-II (5062))
- Measuring cable MK 8 (6210) (Messkabel MK 8 (6210))
- Measuring cable MK 15 (6710) (Messkabel MK 15 (6710))
- Test adapter wood moisture (6070) (Prüfadapter Holzfeuchte (6070))
- Test adapter temperature (6071) (Prüfadapter Temperatur (6071))
- BNC adapter (6050) (BNC-Adapter (6050))