Crack inspection

Transparent crack width ruler made of acrylic. Crack widths can be measured from 0.1 mm to 1 mm in steps of 0.05 and from 1 to 7 mm in steps of 0.5.
 

With this you attach the crack width or colour chart to walls and can easily remove it again without leaving any residue. Non-greasy.

Ideal for architectural engineers, carpenters, maintenance personnel, teachers, students and everyday home measurements to accurately measure cylindrical holes and obtain the correct size for repairs or replacement of wall cords.

With the crack depth card, you can measure cracks in different materials quickly and precisely. The card has an opposing scale on both sides, making it easier to read crack depths in different directions.

The stainless steel blade with a thickness of 0.1 mm of the crack depth gauge is provided with a laser engraving and thus suitable for measurements according to the "Guideline for an initial assessment of hall supporting structures made of wood" ("Leitfaden zu einer ersten Begutachtung von Hallentragwerken aus Holz") of the Studiengemeinschaft Holzleimbau e. V. (study group for wood glue construction).

Material: stainless steel, plastic housing
Max. Measuring length: up to 115 mm 

Our crack magnifier set with mobile phone holder consists of the following components:

- Eschenbach precision scale magnifier 10 x
- LED illumination handle
- Panodapter Universal smartphone mount*
- Incl. batteries (2 x Baby)

*suitable for smartphones up to 78 mm width

Our high-quality crack monitors are suitable for indoor and outdoor use!
Comparable article: Crack monitor SC-300

Our high-quality crack monitors are suitable for indoor and outdoor use!
With adhesive material.
Comparable article: 2 pieces from Rissmonitor SC-300

Our high-quality crack monitor for indoor and outdoor use is the price alternative to the "TT-3" from TCL-I. We supply this crack monitor optionally with and without mounting material.
In contrast to the SC-100, the SC-200 has no fixing bolts.

Our high-quality SC-300 crack monitor for indoor and outdoor applications offers a cost-effective alternative to the TCL-I models. It is available with or without mounting material. In contrast to the SC-200, the SC-300 has several advantages

Our high-quality crack monitor for indoor and outdoor use is the price alternative to the "TT-1" from TCL-I. We supply this crack monitor optionally with and without mounting material.

For measuring a masonry offset in vertical and horizontal direction.
Measuring range:
Offset from -5 mm to +120 mm (vertical).
Crack width from -10 to + 50 mm (horizontal)

Our high-quality crack monitors are suitable for indoor and outdoor use!
With adhesive material

Comparable article: Crack monitor SC-100 for indoors and outdoors (Rissmonitor SC-100 für innen und außen)

Both sides of the card can be designed individually according to your wishes!

Prices incl. VAT
  50 pieces: 235,- €
100 pieces: 379,- €
200 pieces: 629,- €

We design both sides of the card individually according to your wishes!

Prices incl. VAT
  50 pieces: 189,- €
100 pieces: 309,- €
200 pieces: 509,- €
 

Stable crack width chart made of plastic in graduations from 0.05 mm to 1.2 mm in 0.05 steps, as well as 1.3 / 1.4 / 1.6 / 1.8 / 2.0 / 2.5 / 3.0 and 3.5 mm.
On the reverse side, coloured fields indicate the temperature in 1° C steps (from 8° to 32° C.).

This transparent crack width map is produced by laser exposure instead of printing, which enables extremely precise visualisation of fine crack widths. It is particularly suitable for users who require greater accuracy than is possible with the printing process.

Electronic depth gauge for measuring tyre treads, borehole depths, joint depths, etc.

• Measuring range: 0 to 25.4 mm
• Measuring steps: 0.01 mm
• Measuring needle: Has a diameter of 1.6 mm for the first 10 mm and then increases to 3 mm

Incl. battery (button cell 1.5 volt) and German manual

Magnetic Photo Measuring Card
Length: 10 cm
Thickness: 0.9 mm

Consisting of:

• Photo crack card in credit card format (Foto-Risskarte im Scheckkartenformat)
• Plastic crack width and crack depth card (Rissbreiten- und Risstiefenkarte aus Kunststoff)
• Transparent crack width card with protractor (Transparenter Rissbreitenkarte mit Winkelmesser

These mounting plates for the Saugnac E-1 crack detector are made of special PA12 nylon, which offers high impact resistance, UV resistance and dimensional stability. There are two versions of the mounting plates:  

•     P1E1 for single-axis measurement
•     P2E1 for two-axis measurement

The multi-sensor is connected to the Rissfox Mini. A further 4 crack sensors can then be connected to it, making a total of 5 sensors (Sensoren).
 

We design both sides of the card for you with your logo and personal address, according to your wishes!
Prices incl. VAT
 250 pieces: 145,- Euro + 71,40,- Euro cliché creation (one-time)
 500 pieces: 200,- Euro + 71,40,- Euro cliché creation (one-time)
1000 pieces: 345,- Euro + 71,40,- Euro cliché production (one-time)

The card is made of sturdy plastic and is suitable as a photo scale, crack width and depth gauge.
Dimensions:
Length 100 mm, width 30 mm, thickness 0.5 mm

Measure profile or crack depths up to a depth of 40 mm. The scale has a Nonius, so you can measure tenths of a millimetre accurately.

Fully automatic detection of crack movements, length changes, air temperature and humidity thanks to high-resolution crack analysis.
 

Inexpensive crack monitor for monitoring cracks indoors and outdoors. Mounting is very easy and quick due to self-adhesive labels. The accuracy can be read off to 1/10 mm.
Available individually or in the low-priced box of 10.

Inexpensive crack monitor from Saugnac for monitoring cracks in dry indoor spaces. Mounting is very easy due to self-adhesive labels. The accuracy can be read to 1/10 mm.
Available individually or in the inexpensive box of 10.

Inexpensive crack monitor for monitoring cracks indoors and outdoors. Mounting is very easy and quick due to self-adhesive labels. The accuracy can be read to 1/20 mm. The special feature here is the very easy readability.
Available individually or in the low-priced box of 10.

​For measuring protrusions or masonry movements. The measuring screw is clamped in a spring and can be moved in both directions ("Z-axis").

With the G6 crack gauge you measure the course of distances and rotations in a plane.

The Saugnac E1 crack measuring device is the ideal choice for professionals who need precise and reliable measurements to ensure the safety and durability of structures.

The Remotefox is used for remote transmission of the measurement data.

Steel ruler with millimetre and half-millimetre engraving. The graduation starts at the short edge, so the ruler can also be used as a depth gauge for cracks, crevices, etc. It is also well suited as a guide for cutter knives.

Steel ruler with millimetre and half-millimetre engraving. The graduation starts at the short edge, so the ruler can also be used as a depth gauge for cracks, etc. With stop for easy reading. With stop for easier reading.

The card is in credit card format and made of sturdy plastic.
Dimensions: length 85 mm, width 54 mm, thickness 0.8 mm