Gann Hydromette BL E, #11300
Gann Hydromette BL E, #11300
-> The Hydromette BL E is also available as a set, please click hereThe BL E is an electronic triple measuring instrument for wood moisture, building moisture and temperature. It enables precision measurements of wood, building, insulation and insulating materials by individual measurements according to the resistance measuring principle.
The wood moisture measuring circuit can be used to measure sawn timber (up to 180 mm thick), chipboard and parquet.
The unit has a material switchover for automatic measured value correction of 23 building, insulation and insulating materials, such as screeds, mortars, plasters, concrete, bricks and various other insulating materials.
The connection of an active electrode B 55 BL enables non-destructive moisture measurement and indication in ceilings, walls, floors and other building materials.
Attention!
The information given here on product description, measuring ranges, properties and accessories refers to the Hydromette BL E from software version 2.00 onwards.
If you do not know which software version is installed on your meter, please contact us. It is possible to update your Hydromette to the latest version by means of a factory software update.
Wood moisture:
5.5 - 58 % (atro) depending on the material being measured.
Building moisture:
for resistance-based measurements:
0.1 - 42.2 % by weight or 0.2 - 9.9 CM-% depending on the material to be measured
for capacitive measurements: (*)
0 - 200 digits Scan range
Temperature:
depending on the connected Pt 100 sensor between (max.) -50 - +350 °C
Features:
Optional: 5 customer-specific characteristic curves can be programmed in at the factory
Power supply: 9 V block battery
Housing dimensions: 175 [L] x 50 [W] x 30 mm [H], weight approx. 160 g
Total length: approx. 185 mm
The information given here on product description, measuring ranges, properties and accessories refers to the Hydromette BL E from software version 2.00 onwards.
If you do not know which software version is installed on your meter, please contact us. It is possible to update your Hydromette to the latest version by means of a factory software update.
Wood moisture:
5.5 - 58 % (atro) depending on the material being measured.
Building moisture:
for resistance-based measurements:
0.1 - 42.2 % by weight or 0.2 - 9.9 CM-% depending on the material to be measured
for capacitive measurements: (*)
0 - 200 digits Scan range
Temperature:
depending on the connected Pt 100 sensor between (max.) -50 - +350 °C
Features:
- Handy quick moisture meter for lightning-fast single and serial measurements with high-quality measuring amplifier.
- Direct display of wood or building moisture content in % by weight or in CM-% for resistance-based measurements via the 3-line LCD display, resolution: 0.1 % or 0.1° C;
- The scan mode when connecting a B 55 BL provides digit values between 1 - 200
- Dual wood type correction (characteristic curve group 2 and 3) for automatic measured value correction
- Fast measurement of moisture in set building materials through the capacitive high-frequency measuring method using a B 55 BL active electrode
- Precision temperature measurement with Pt 100 measuring resistors in 4-wire technology
- Min, max and hold function for the measured values
- Storage of the last 5 measured values
- Automatic instrument switch-off
Optional: 5 customer-specific characteristic curves can be programmed in at the factory
Power supply: 9 V block battery
Housing dimensions: 175 [L] x 50 [W] x 30 mm [H], weight approx. 160 g
Total length: approx. 185 mm
Operating instructions Download here
Wood moisture:
- Impact electrode M 20 (3300) (Impact electrode M 20, #31003300)
- Piercing electrode M 19 (3400) (Einstech-Elektrode M 19 (3400))
- Ramming electrode M 18 (3500) (Ramming electrode M 18, #31003500)
Building moisture:
- Active electrode B 55 BL (13755) (Aktiv-Elektrode B 55 BL (13755))
- Impact electrode M 20 (3300) (Impact electrode M 20, #31003300)
- Piercing electrode M 19 (3400) (Einstech-Elektrode M 19 (3400))
- Insertion electrode pair M 6 (3700) (Plug-in electrode pair M 6, #31003700)
- Depth-measuring electrode pair M 21-100 (3200) (Depth measuring electrode pair M 21-100, #31003200)
- Depth gauge electrode pair M 21-250 (3250) (Depth measuring electrode pair M 21-250, #31003250)
- Flat electrode pair M 6-Bi 300, #3703 (Flach-Elektrodenpaar M 6-Bi 300, #3703)
- Flat electrode pair M 6-Bi 200, #3702 (Flach-Elektrodenpaar M 6-Bi 200, #3702)
- Brush-electrode pair M 25-100 (3740) (Brush-electrode pair M 25-100, #31003740)
- Brush-electrode pair M 25-300 (3743) (Brush-electrode pair M 25-300, #31003743)
- Plug-in electrode tips M 20-Bi 200, #4360 (Insertion electrode tip pair M 20-Bi 200, #31004360)
- Insertable electrode tips M 20-Bi 300, #4365 (Insertion electrode tip pair M 20-Bi 300, #31004365)
- Insertable electrode tips M 6-150, #3706 (Insertion electrode tip pair M 6-150, #31003706)
- Insertable electrode tips M 6-250, #3707 (Einsteck-Elektrodenspitzen M 6-250, #3707)
Material temperature:
- Insertion temperature probe ET 10 BL (13165) (Einstech-Temperaturfühler ET 10 BL (13165))
Surface temperature:
- Surface temperature probe OT 100 BL (Oberflächen-Temperaturfühler OT 100 BL)
Other accessories:
- Ready case BK 14-I (5061) (Gann stand-by case BK 14-I, #31005061)
- Ready case BK 14-II (5062) (Gann stand-by case BK 14-II, #31005062)
- BNC adapter (6050) (BNC-Adapter (6050))
- Test adapter for building moisture (6071) (Gann test adapter building moisture, #31006071)
- Measuring cable MK 8 (6210) (Gann measuring cable MK 8, #31006210)
- Connecting cable MK 16 (16710) (Verbindungskabel MK 16 (16710))
Gann Mess- u. Regeltechnik GmbH
Schillerstr. 63
D-70839 Gerlingen
Telefon: +49 (0) 7156-4907-0
Telefax: +49 (0) 7156-4907-40
E-Mail: info@gann.de
https://www.gann.de/
Schillerstr. 63
D-70839 Gerlingen
Telefon: +49 (0) 7156-4907-0
Telefax: +49 (0) 7156-4907-40
E-Mail: info@gann.de
https://www.gann.de/