Gann humidity electrode RH-T 37 BL flex 350, #31013143
The RH-T 37 BL flex 350 is an electrode for
air humidity and air temperature measurements - especially suitable for use in bulk materials and solids (e.g. masonry or screeds).
Its areas of application include moisture analysis, damage assessment, monitoring of construction drying and testing the readiness of floor and wall coverings for laying.
The sensor tube has a diameter of 6.5 mm, which means that measurements can also be taken in joints without damaging wall or floor tiles.
In combination with a hydromette, the humidity in the borehole can be measured and the occupancy or moisture content of certain set building materials can be determined by means of
sorption isotherms.
For particularly precise measurements, the device should be exposed to the ambient climate to be measured for 10 - 15 minutes so that any temperature differences between the electrode and the ambient climate can be compensated.
Measuring ranges of the RH-T 37 BL flex 350
Humidity
- 0 - 100 % r.h.
- ± 1.8 % r.h. (10 - 90 % r.h.) Sensor accuracy
Air temperature
- -20 to 70 °C
- ± 0.5 °C (-10 to 70 °C) Sensor accuracy
Building humidity
- 5 to 98 % r.h.
- 0.2 to 3.7 % by weight
Technical data
- The flexible sensor tube ("gooseneck") allows easy and comfortable measurements in places that are difficult to access.
- Probe tube: 350 mm (length ) and 6.5 mm (diameter)
- Membrane filter as standard for measurements in dusty air, with pollutant emissions or high air velocity
Compatible with
