



Plug-in electrode pair M 6, #3700
Plug-in electrode pair M 6, #3700
The M 6 plug-in electrode pair can be used directly for building moisture measurement and also serves as a basic system for various other electrode pairs (see below).The electrode pair can be used with all hydromettes based on the resistance measurement method.
The delivery includes 10 electrode tips of 40 and 60 mm length each.
- For measuring hard set building materials (e.g. concrete or screed).
- The electrodes must always be used in pairs and should ideally be inserted into the material to be measured at a distance of approx. 8 - 10 cm from each other.
- To ensure conductivity between the material to be measured and the electrode tips, contact mass must be used for all hard building materials.
- Flat electrode pair M 6-Bi 200 and M 6-Bi 300
- Plug-in electrode tip pair M 20-Bi 200 and M 20-Bi 300
Compatible with the following Gann meters:
- Hydromette BL E (00001)
- Hydromette BL E (11300)
- Hydromette HB 30 (1510)
- Hydromette HT 85 T (1370)
- Hydromette M 4050 (1400)
- Hydromette RTU 600 (1670)
- Hydromette UNI 2 (1550)
- Flat electrode pair M 6-Bi 200 (3702) (Flach-Elektrodenpaar M 6-Bi 200 (3702))
- Flat electrode pair M 6-Bi 300 (3703) (Flach-Elektrodenpaar M 6-Bi 300 (3703))
- Plug-in electrode tips M 6-150 (3706) (Einsteck-Elektrodenspitzen M 6-150 (3706))
- Plug-in electrode tips M 6-250 (3707) (Einsteck-Elektrodenspitzen M 6-250 (3707))
- Elektrodenspitzen ohne Isolation, 40 mm (4640)
- Elektrodenspitzen ohne Isolation, 60 mm (4660)
- Box with contact mass (5400) (Dose mit Kontaktmasse (5400)
- Gann measuring cable MK 8, (6210) (Gann Messkabel MK 8, (6210))